Theoretical Study of Atom-Transfer Radical Addition Reactions between Perfluoroalkyl Iodides and Styrene Using a Copper Photoredox Catalyst.

The reaction mechanism of atom-transfer radical addition (ATRA) reactions of perfluoroalkyl iodides with styrene using a Cu(I) photoredox catalyst was analyzed using density functional theory calculations. From among four previously mentioned mechanisms, the ligand-transfer mechanism (ligand abstraction by the radical intermediate) was shown to be most plausible. It was also suggested that the ATRA product would also be reduced by the photoexcited Cu(I) complex.

Theoretical Investigation into a Possibility of Formation of Propylene Oxide Homochirality in Space.

The preferential synthesis or destruction of a single enantiomer by ultraviolet circularly polarized light (UV-CPL) has been proposed as a possible triggering mechanism for the extraterrestrial origin of homochirality. Herein, we investigate the photoabsorption property of propylene oxide (c-C3H6O) for UV-CPL in the Lyman-α region. Our calculations show that c-C3H6O was produced by CH3+ and CH3CH(OH)CH3 or C3H7• and O (triplet). The computed electronic circular dichroism spectra show that c-C3H6O and the intermediate (CH3CH(OH)CH2+) could absorb the UV-CPL originating from the Lyman-α emitter spectrum, suggesting that the photolysis of c-C3H6O or CH3CH(OH)CH2+ upon irradiation could induce chiral symmetry breakage.

Theoretical Study of the Mechanism for the Reaction of Trimethylaluminum with Ozone.

The mechanism for the reaction of trimethylaluminum (TMA, Al(CH3)3) with ozone (O3) was investigated in detail using density functional theory calculations to understand the atomic layer deposition processes that form aluminum oxide surfaces. We examined the reactions of TMA and some possible intermediates with O3 and revealed plausible paths to form methoxy (-OCH3), formate (-OCHO), bicarbonate (-CO3H), and hydroxyl (-OH) species. These species have been observed in previous experimental studies. It was shown that TMA easily reacts with O3 to generate the Al(CH3)2(OCH3)(O2) intermediate. The subsequent reaction between the OCH3 and O2 groups finally generated an intermediate having a formate group. When all of the CH3 groups are converted into OCH3 or OCHO, O3 will react with these groups. In the latter reaction, bicarbonate was shown to be formed.

On-Demand Chirality Transfer of Human Serum Albumin to Bis(thiophen-2-yl)hexafluorocyclopentenes through Their Photochromic Ring Closure.

Photochromic 1,2-bis(5-carboxy-3-methyl-2-thienyl)hexafluorocyclopentene and its dimethyl ester incorporated in human serum albumin (HSA) showed highly enantioselective photochromic ring-closing reactions upon 366 nm light irradiation. The absolute stereochemistry of the major ring-closed form of the dicarboxylic acid at the newly formed sp3 carbon atoms was determined to be (S,S) by the process of docking simulation of the diarylethene molecule and HSA followed by molecular dynamics calculations and comparison of the measured and calculated CD spectra. Esterification of the major closed form of the diacid gave the minor closed form of the diester. The absolute stereochemistry of the major diester was thus determined to be (R,R).

Weak O2 binding and strong H2O2 binding at the non-heme diiron center of trypanosome alternative oxidase.

Alternative oxidase (AOX) catalyzes the four-electron reduction of dioxygen to water as an additional terminal oxidase, and the catalytic reaction is critical for the parasite to survive in its bloodstream form. Recently, the X-ray crystal structure of trypanosome alternative oxidase (TAO) complexed with ferulenol was reported and the molecular structure of the non-heme diiron center was determined. The binding of O2 was a unique side-on type compared to other iron proteins. In order to characterize the O2 binding state of TAO, the O2 binding states were searched at a quantum mechanics/molecular mechanics (QM/MM) theoretical level in the present study. We found that the most stable O2 binding state is the end-on type, and the binding states of the side-on type are higher in energy. Based on the binding energies and electronic structure analyses, O2 binds very weakly to the TAO iron center (ΔE =6.7 kcal mol-1) in the electronic state of Fe(II)…OO, not in the suggested charge transferred state such as the superoxide state (Fe(III)OO· -) as seen in hemerythrin. Coordination of other ligands such as water, Cl-, CN-, CO, N3- and H2O2 was also examined, and H2O2 was found to bind most strongly to the Fe(II) site by ΔE = 14.0 kcal mol-1. This was confirmed experimentally through the measurement of ubiquinol oxidase activity of TAO and Cryptosporidium parvum AOX which was found to be inhibited by H2O2 in a dose-dependent and reversible manner.

Understanding the Detection Mechanisms and Ability of Molecular Hydrogen on Three-Dimensional Bicontinuous Nanoporous Reduced Graphene Oxide.

Environmental safety has become increasingly important with respect to hydrogen use in society. Monitoring techniques for explosive gaseous hydrogen are essential to ensure safety in sustainable hydrogen utilization. Here, we reveal molecular hydrogen detection mechanisms with monolithic three-dimensional nanoporous reduced graphene oxide under gaseous hydrogen flow and at room temperature. Nanoporous reduced graphene oxide significantly increased molecular hydrogen physisorption without the need to employ catalytic metals or heating. This can be explained by the significantly increased surface area in comparison to two-dimensional graphene sheets and conventional reduced graphene oxide flakes. Using this large surface area, molecular hydrogen adsorption behaviors were accurately observed. In particular, we found that the electrical resistance firstly decreased and then gradually increased with higher gaseous hydrogen concentrations. The resistance decrease was due to charge transfer from the molecular hydrogen to the reduced graphene oxide at adsorbed molecular hydrogen concentrations lower than 2.8 ppm; conversely, the resistance increase was a result of Coulomb scattering effects at adsorbed molecular hydrogen concentrations exceeding 5.0 ppm, as supported by density functional theory. These findings not only provide the detailed adsorption mechanisms of molecular hydrogen, but also advance the development of catalyst-free non-heated physisorption-type molecular detection devices.

A New Lipid Force Field (FUJI).

To explore inhomogeneous and anisotropic systems such as lipid bilayers, the Lennard-Jones particle mesh Ewald (LJ-PME) method has been applied without a conventional isotropic dispersion correction. As the popular AMBER and CHARMM lipid force fields were developed using a cutoff scheme, their lipid bilayers unacceptably shrink when using the LJ-PME method. In this study, a new all-atom lipid force field (FUJI) was developed on the basis of the AMBER force-field scheme including the Lipid14 van der Waals parameters. Point charges were calculated using the restrained electrostatic potentials of many lipid conformers. Further, torsion energy profiles were calculated using high-level ab initio molecular orbitals (LCCSD(T)/Aug-cc-pVTZ//LMP2/Aug-cc-pVTZ), following which the molecular mechanical dihedral parameters were derived through a fast Fourier transform. By incorporation of these parameters into a new lipid force field without fitting experimental data, the desired lipid characteristics such as the area per lipid and lateral diffusion coefficients were obtained through GROMACS molecular dynamics simulations using the LJ-PME method and virtual hydrogen sites. The calculated area per lipid and lateral diffusion coefficients showed satisfactory agreement with experimental data. Furthermore, the electron-density profiles along the membrane normal were calculated for pure lipid bilayers, and the resulting membrane thicknesses agreed well with the experimental values. As the new lipid force field is compatible with FUJI for protein and small molecules, the new FUJI force field will offer accurate modeling for complex systems consisting of various membrane proteins and lipids.

In Silico Structural Modeling and Analysis of Elongation Factor-1 Alpha and Elongation Factor-like Protein.

Translation elongation factor-1alpha (EF-1α) or its paralog elongation factor-like proteins (EFL) interact with an aminoacyl-transfer RNA (aa-tRNA) to play its essential role in elongation of peptide-chain during protein synthesis. Species usually have either an EF-1α or EFL protein; however, some species have both EF-1α and EFL (dual-EF-containing species). In the dual-EF-containing species, EF-1α appeared to be highly divergent in the sequence. Homology modeling and surface analysis of EF-1α and EFL were performed to examine the hypothesis that the divergent EF-1α in the dual-EF-containing eukaryotes does not strongly interact with aa-tRNA compared to the canonical EF-1α and EFL. The subsequent molecular dynamics simulations were carried out to confirm the validity of modeled structures and to analyze their stability. It was found that the molecular surfaces of the divergent EF-1α proteins were negatively charged partly, and thus they might not interact with negatively charged aa-tRNA as strongly as the canonical ones. The molecular docking simulations between EF-1α/EFL and aa-tRNA also support the hypothesis.

First-Principles Study of the Reaction Mechanism of CHO + H on Graphene Surface.

Many organic molecules observed in the interstellar medium are considered to be formed on dust grains and populated into the gas phase. We analyzed the reaction of HCO + H on a graphene surface using ab initio molecular dynamics simulations as a case study of the formation and desorption of organic molecules on interstellar dust particles. During the reactions of chemisorbed CHO (chemisorbed at the C atom) with free H, CO was generated and efficiently desorbed from the surface. These results suggest that the reactions, of which the reactant forms a covalent bond with the surface while the product does not, cause efficient desorption of the product upon reaction. In such reactions a repulsive force between the product and the surface would be generated and accelerate translation of the product in a specific direction. In addition, it was also shown that the branching ratio of the reactions between radical species on the surface would be affected by the form of the adsorption on the surface, e.g., when a free H reacted with the CHO chemisorbed at the C atom, CH2O was not generated.

Photosubstitution Reaction of cis-[Ru(bpy)2(CH3CN)2]2+ and cis-[Ru(bpy)2(NH3)2]2+ in Aqueous Solution via Monoaqua Intermediate.

The photoinduced ligand exchange reaction of Ru(II) complexes in aqueous solution was studied using density functional theory (DFT). The optimized structures of the lowest triplet state of cis-[Ru(bpy)2(CH3CN)2]2+ (bpy = bipyridine), cis-[Ru(bpy)2(NH3)2]2+, and their monoaqua complexes were analyzed. The metal-centered (3MC) structure was lower than the metal-to-ligand charge transfer (3MLCT) structure for cis-[Ru(bpy)2(CH3CN)2]2+, whereas the 3MLCT structure was lower than the 3MC structure for cis-[Ru(bpy)2(NH3)2]2+. Such a difference would correlate with the higher quantum yield of the former complex. For the monoaqua complexes, the most stable local minimum structure was the 3MC structure, in which the Ru-OH2O and Ru-Nbpy ( trans to the oxygen) bonds were elongated. Therefore, the dissociation of the H2O ligand would be preferred to that of the CH3CN (or NH3) ligand from the monoaqua intermediate, which might result in the reformation of the monoaqua intermediate, and thus, the formation of the bis-aqua product would take a longer time than that of the monoaqua intermediate.

Electrochemical Generation and Spectroscopic Characterization of the Key Rhodium(III) Hydride Intermediates of Rhodium Poly(bipyridyl) H2-Evolving Catalysts.

We previously reported that the [RhIII(dmbpy)2Cl2]+ (dmbpy = 4,4'-dimethyl-2,2'-bipyridine) complex is an efficient H2-evolving catalyst in water when used in a molecular homogeneous photocatalytic system for hydrogen production with [RuII(bpy)3]2+ (bpy = 2,2'-bipyridine) as photosensitizer and ascorbic acid as sacrificial electron donor. The catalysis is believed to proceed via a two-electron reduction of the Rh(III) catalyst into the square-planar [RhI(dmbpy)2]+, which reacts with protons to form a Rh(III) hydride intermediate that can, in turn, release H2 following different pathways. To improve the current knowledge of these key intermediate species for H2 production, we performed herein a detailed electrochemical investigation of the [RhIII(dmbpy)2Cl2]+ and [RhIII(dtBubpy)2Cl2]+ (dtBubpy = 4,4'-di- tert-butyl-2,2'-bipyridine) complexes in CH3CN, which is a more appropriate medium than water to obtain reliable electrochemical data. The low-valent [RhI(Rbpy)2]+ and, more importantly, the hydride [RhIII(Rbpy)2(H)Cl]+ species (R = dm or dtBu) were successfully electrogenerated by bulk electrolysis and unambiguously spectroscopically characterized. The quantitative formation of the hydrides was achieved in the presence of weak proton sources (HCOOH or CF3CO3H), owing to the fast reaction of the electrogenerated [RhI(Rbpy)2]+ species with protons. Interestingly, the hydrides are more difficult to reduce than the initial Rh(III) bis-chloro complexes by ∼310-340 mV. Besides, 0.5 equiv of H2 is generated through their electrochemical reduction, showing that Rh(III) hydrides are the initial catalytic molecular species for hydrogen evolution. Density functional theory calculations were also performed for the dmbpy derivative. The optimized structures and the theoretical absorption spectra were calculated for the initial bis-chloro complex and for the various rhodium intermediates involved in the H2 evolution process.

Molecular Mechanism of the Reaction Specificity in Threonine Synthase: Importance of the Substrate Conformations.

Threonine synthase (ThrS) catalyzes the final chemical reaction of l-threonine biosynthesis from its precursor, O-phospho-l-homoserine. As the phosphate ion generated in its former half reaction assists its latter reaction, ThrS is recognized as one of the best examples of product-assisted catalysis. In our previous QM/MM study, the chemical reactions for the latter half reactions, which are critical for the product-assisted catalysis, were revealed. However, accurate free energy changes caused by the conformational ensembles and entrance of water molecules into the active site are unknown. In the present study, by performing long-time scale MD simulations, the free energy changes by the divalent anions (phosphate or sulfate ions) and conformational states of the intermediate states were theoretically investigated. We found that the calculated free energy double differences are in good agreement with the experimental results. We also revealed that the phosphate ion contributes to forming hydrogen bonds that are suitable for the main reaction progress. This means that the conformation of the active site amino acid residues and the substrate, and hence, the tunable catalysis, are controlled by the product phosphate ion, and this clearly demonstrates a molecular mechanism of the product-assisted catalysis in ThrS.

Molecular mechanisms of substrate specificities of uridinecytidine kinase.

A uridine-cytidine kinase (UCK) catalyzes the phosphorylation of uridine (Urd) and cytidine (Cyd) and plays a significant role in the pyrimidine-nucleotide salvage pathway. Unlike ordinary ones, UCK from Thermus thermophilus HB8 (ttCK) loses catalytic activity on Urd due to lack of a substrate binding ability and possesses an unusual amino acid, i.e. tyrosine 93 (Tyr93) at the binding site, whereas histidine (His) is located in the other UCKs. Mutagenesis experiments revealed that a replacement of Tyr93 by His or glutamine (Gln) recovered catalytic activity on Urd. However, the detailed molecular mechanism of the substrate specificity has remained unclear. In the present study, we performed molecular dynamics simulations on the wild-type ttCK, two mutant ttCKs, and a human UCK bound to Cyd and three protonation forms of Urd to elucidate their substrate specificity. We found three residues, Tyr88, Tyr/His/Gln93 and Arg152 in ttCKs, are important for recognizing the substrates. Arg152 contributes to induce a closed form of the binding site to retain the substrate, and the N3 atom of Urd needed to be deprotonated. Although Tyr88 tightly bound Cyd, it did not sufficiently bind Urd because of lack of the hydrogen bonding. His/Gln93 complemented the interaction of Tyr88 and raised the affinity of ttCK to Urd. The crucial distinction between Tyr and His or Gln was a role in the hydrogen-bonding network. Therefore, the ability to form both hydrogen-bonding donor and accepter is required to bind both Urd and Cyd.

Catalytic Mechanism of Nitrile Hydratase Subsequent to Cyclic Intermediate Formation: A QM/MM Study.

The catalytic mechanism of an Fe-containing nitrile hydratase (NHase) subsequent to the formation of a cyclic intermediate was investigated using a hybrid quantum mechanics/molecular mechanics (QM/MM) method. We identified the following mechanism: (i) proton transfer from ßTyr72 to the substrate via αSer113, and cleavage of the S-O bond of αCys114-SO(-) and formation of a disulfide bond between αCys109 and αCys114; (ii) direct attack of a water molecule on the sulfur atom of αCys114, which resulted in the generation of both an imidic acid and a renewed sulfenic cysteine; and (iii) isomerization of the imidic acid to the amide. In addition, to clarify the role of ßArg56K, which is one of the essential amino residues in the enzyme, we analyzed a ßR56K mutant in which ßArg56 was replaced by Lys. The results suggest that ßArg56 is necessary for the formation of disulfide intermediate by stabilizing the cleavage of the S-O bond via a hydrogen bond with the oxygen atom of αCys114-SO(-).

A computational mechanistic investigation of hydrogen production in water using the [Rh(III)(dmbpy)2Cl2](+)/[Ru(II)(bpy)3](2+)/ascorbic acid photocatalytic system.

We recently reported an efficient molecular homogeneous photocatalytic system for hydrogen (H2) production in water combining [Rh(III)(dmbpy)2Cl2](+) (dmbpy = 4,4'-dimethyl-2,2'-bipyridine) as a H2 evolving catalyst, [Ru(II)(bpy)3](2+) (bpy = 2,2'-bipyridine) as a photosensitizer and ascorbic acid as a sacrificial electron donor (Chem. - Eur. J., 2013, 19, 781). Herein, the possible rhodium intermediates and mechanistic pathways for H2 production with this system were investigated at DFT/B3LYP level of theory and the most probable reaction pathways were proposed. The calculations confirmed that the initial step of the mechanism is a reductive quenching of the excited state of the Ru photosensitizer by ascorbate, affording the reduced [Ru(II)(bpy)2(bpy˙(-))](+) form, which is capable, in turn, of reducing the Rh(III) catalyst to the distorted square planar [Rh(I)(dmbpy)2](+) species. This two-electron reduction by [Ru(II)(bpy)2(bpy˙(-))](+) is sequential and occurs according to an ECEC mechanism which involves the release of one chloride after each one-electron reduction step of the Rh catalyst. The mechanism of disproportionation of the intermediate Rh(II) species, much less thermodynamically favoured, cannot be barely ruled out since it could also be favoured from a kinetic point of view. The Rh(I) catalyst reacts with H3O(+) to generate the hexa-coordinated hydride [Rh(III)(H)(dmbpy)2(X)](n+) (X = Cl(-) or H2O), as the key intermediate for H2 release. The DFT study also revealed that the real source of protons for the hydride formation as well as the subsequent step of H2 evolution is H3O(+) rather than ascorbic acid, even if the latter does govern the pH of the aqueous solution. Besides, the calculations have shown that H2 is preferentially released through an heterolytic mechanism by reaction of the Rh(III)(H) hydride and H3O(+); the homolytic pathway, involving the reaction of two Rh(III)(H) hydrides, being clearly less favoured. In parallel to this mechanism, the reduction of the Rh(III)(H) hydride into the penta-coordinated species [Rh(II)(H)(dmbpy)2](+) by [Ru(II)(bpy)2(bpy˙(-))](+) is also possible, according to the potentials of the respective species determined experimentally and this is confirmed by the calculations. From this Rh(II)(H) species, the heterolytic and homolytic pathways are both thermodynamically favourable to produce H2 confirming that Rh(II)(H) is as reactive as Rh(III)(H) towards the production of H2.

Involvement of propionate side chains of the heme in circular dichroism of myoglobin: experimental and theoretical analyses.

Incorporation of the heme into globin induces a prominent circular dichroism (CD) band in the Soret region. The appearance of heme optical activity is widely believed to arise from the interaction between the heme and aromatic residues of the globin. However, hemoglobin (Hb) containing the reversed heme exhibits a CD spectrum obviously different from that of native Hb, indicating that the interactions of heme side chains with globin contribute to the appearance of heme optical activity. We examined this possibility by comparing CD spectra of native myoglobin (Mb) and those of Mb reconstituted with synthetic hemes lacking vinyl and/or propionate. Replacement of 2,4-vinyl groups with methyl induced moderate changes. In contrast, replacement of 6,7-propionate groups with carboxylate resulted in complete disappearance of the positive Soret CD band. To get theoretical basis for the contributions of 6,7-side chains on the band, we investigated the CD spectra at a time-dependent density functional theory level. In the antiparallel conformation of the 6,7-side chains, the rotational strengths were calculated to be positive, on the other hand in the parallel conformation to be negative. We also found that the weak Soret CD band in 2,4-dimethyl-6,7-dicarboxyheme can be explained by canceling between different carboxyl conformers.

A QM/MM study of the L-threonine formation reaction of threonine synthase: implications into the mechanism of the reaction specificity.

Threonine synthase catalyzes the most complex reaction among the pyridoxal-5'-phosphate (PLP)-dependent enzymes. The important step is the addition of a water molecule to the Cß-Cα double bond of the PLP-α-aminocrotonate aldimine intermediate. Transaldimination of this intermediate with Lys61 as a side reaction to form α-ketobutyrate competes with the normal addition reaction. We previously found that the phosphate ion released from the O-phospho-l-homoserine substrate plays a critical role in specifically promoting the normal reaction. In order to elucidate the detailed mechanism of this "product-assisted catalysis", we performed comparative QM/MM calculations with an exhaustive search for the lowest-energy-barrier reaction pathways starting from PLP-α-aminocrotonate aldimine intermediate. Satisfactory agreements with the experiment were obtained for the free energy profile and the UV/vis spectra when the PLP pyridine N1 was unprotonated and the phosphate ion was monoprotonated. Contrary to an earlier proposal, the base that abstracts a proton from the attacking water was the ε-amino group of Lys61 rather than the phosphate ion. Nevertheless, the phosphate ion is important for stabilizing the transition state of the normal transaldimination to form l-threonine by making a hydrogen bond with the hydroxy group of the l-threonine moiety. The absence of this interaction may account for the higher energy barrier of the side reaction, and explains the mechanism of the reaction specificity afforded by the phosphate ion product. Additionally, a new mechanism, in which a proton temporarily resides at the phenolate O3' of PLP, was proposed for the transaldimination process, a prerequisite step for the catalysis of all the PLP enzymes.

Electronic excitations in Fischer-type Cr and W aminocarbene complexes: a combined ab initio and experimental study.

The influence of the substitution on the carbene ligand in the series of Fischer-type Cr and W aminocarbene complexes was studied experimentally by UV-vis spectroscopy and theoretically by comparative ab initio SA-CASSCF/MS-CASPT2 and TD-DFT methods. Both calculations interpreted the experimental UV-vis spectra and their variations caused by substitution effects well. TD-DFT analysis of individual transitions using electron density redistributions indicated that the variation of the absorption spectra due to substitution is accompanied by a change in the character of the low-lying excited states participating in the visible bands. Correlated MS-CASPT2 calculations confirmed the TD-DFT assignments of the lowest-lying transitions in the visible region almost quantitatively.

Heteroleptic diimine copper(I) complexes with large extinction coefficients: synthesis, quantum chemistry calculations and physico-chemical properties.

Using the HETPHEN approach, five new heteroleptic copper(I) complexes composed of a push-pull 4,4'-styryl-6,6'-dimethyl-2,2'-bipyridine ligand and a bulky bis[(2-diphenylphosphino)phenyl]-ether (DPEphos) or a bis2,9-mesityl phenanthroline (Mes2Phen) were prepared and characterized by electronic absorption spectroscopy, electrochemistry, and TD-DFT calculations. These complexes exhibit very intense absorption bands in the visible region with extinction coefficient in the range of 5-7 × 10(4) M(-1) cm(-1). The analysis of the position, intensity and band shape indicates a strong contribution from an intra-ligand charge-transfer transition centered on the styrylbipyridine ligand along with MLCT transitions. These new complexes experimentally demonstrate that good light harvesting properties with bis-diimine copper(I) complexes are a reality if one chooses suitable ligands in the coordination sphere. This constitutes a milestone towards using bis-diimine copper(I) complexes for solar energy conversion (artificial photosynthesis and solar cells).

First application of the HETPHEN concept to new heteroleptic bis(diimine) copper(I) complexes as sensitizers in dye sensitized solar cells.

We report here the synthesis and full chemical and physical characterizations of the first stable heteroleptic copper(I)-bis(diimine) complexes designed for implementation in dye sensitized solar cells (DSC). Thanks to the HETPHEN concept, pure and stable heteroleptic copper(I) complexes were isolated. Anchorage of the sensitizers was provided by 2,2'-biquinoline-4,4'-dicarboxylic acid (dcbqH2), while sterically challenged ligands 2,9-dimesityl-1,10-phenanthroline (L0) and N-hexyl-2,9-dimesityl-1,10-phenanthroline-[a:b]imidazo-(4'-dianisylaminophenyl) (L1) were used to complete the copper(I) coordination sphere. The resulting heteroleptic complexes C1 and C2 exhibit a broad MLCT transition spreading over a wide wavelength domain, especially when adsorbed onto nanoparticulate TiO2 photoanodes, providing a rather comprehensive visible light collection. The corresponding DSC were evaluated under AM 1.5 simulated solar light and rather weak performances were obtained owing to small J(sc) and V(oc). This is due to a combination of low extinction coefficient and poor driving forces for the various interfacial processes. However, significant improvements in the performances were monitored upon ageing in the dark, likely due to beneficial reorganization of the dye monolayers. The possibility to isolate stable asymmetric systems paves the way for structurally assisted photo-induced charge injection from the chemisorbed copper(i) based sensitizers into the conduction band of TiO2, through charge vectorialization.